|
|
|
|
Duct Bank
Heldenfels Enterprises precast duct banks provide a durable, efficient solution for housing and protecting underground electrical and communication conduits in industrial, commercial, and utility applications.
Manufactured in a controlled plant environment, these precast systems deliver consistent conduit alignment, proper concrete cover, and reliable spacing—helping reduce installation time and minimize on-site labor compared to field-built duct banks.
Precast duct banks can be configured in a wide range of conduit layouts, from smaller runs supporting light service to large, high-density banks designed for heavy electrical loads and future expansion. Built to project specifications and delivered ready to install, Heldenfels Enterprises duct banks support safer construction practices, improved schedule certainty, and long-term performance for critical underground infrastructure.
Product Information
Technical Specs
| Configuration (H × W) | # of Conduits (max) | Typical Use / Notes |
| 1H × 2W | 2 conduits | Light service runs, small circuits, minimal conduit requirement |
| 1H × 3W | 3 conduits | Modest electrical service, small installations |
| 1H × 4W | 4 conduits | Small-to-medium service, extra conduit capacity for future growth |
| 1H × 5W | 5 conduits | Service with some growth allowance, redundant conduit, small systems with future expansion in mind |
| 2H × 2W | 4 conduits | Medium capacity runs where vertical stacking helps reduce trench width |
| 2H × 3W | 6 conduits | Medium service / power feeder bank, often used where a single row isn’t enough |
| 2H × 4W | 8 conduits | Larger service runs, feeder circuits, more capacity for growth or redundancy |
| 2H × 5W | 10 conduits | Heavier electrical needs, possibly multiple feeders or mixed services |
| 3H × 2W | 6 conduits | Compact vertical stacks — useful when trench width is limited but depth allows stacking. |
| 3H × 3W | 9 conduits | Common “medium-large” duct bank for campus / facility power distribution. |
| 3H × 4W | 12 conduits | Larger feeder banks, industrial/commercial distribution, reserved spare conduits. |
| 3H × 5W | 15 conduits | Heavy-duty runs — good for large facilities or future-proofing. |
| 4H × 2W | 8 conduits | Deep vertical stack — useful when space is very limited horizontally. |
| 4H × 3W | 12 conduits | Large installations where trench width is constrained but depth is available. |
| 4H × 4W | 16 conduits | Substantial conduit bank — heavy service/feeder infrastructure. |
| 4H × 5W | 20 conduits | Very large installations: data centers, large industrial facilities, campus-scale electrical distribution. |
| 5H × 2W | 10 conduits | Deep stack for heavy capacity where trench width is limited. |
| 5H × 3W | 15 conduits | High-capacity central duct bank for major infrastructure. |
| 5H × 4W | 20 conduits | High-density conduit bank, good for future expansion, redundancy. |
| 5H × 5W | 25 conduits | Maximum typical capacity per single 116″ precast section (standard manufacturer max) — used for large scale installations. |
Delivery & Installation
Applications & Use Cases
Precast box beams are used in highway and roadway bridges, pedestrian crossings, parking structures, and marine platforms, providing efficient, high-strength solutions for short- to medium-span structures that demand durability and rapid installation.
Notes / Caveats
- These numbers assume use of standard conduit sizes (4″ or 6″) as in common precast systems.
- The “height × width” refers to how conduits are stacked in the cross-section, not physical dimensions — actual outside dimensions depend on conduit outer diameter, spacing between conduits, and concrete cover/encasement.
- Many precast sections are built to a standard length (for example, 116 inches ~ 9.6 ft) for modularity.
- For large conduit banks (many conduits), it’s common to “stack or side-by-side” these standard sections to build up the needed capacity or geometry.
Product Information
Technical Specs
Thickness: Built to Specifications
Height Options: Built to Specifications
Installation: Crane ready with lifting hardware
Delivery & Installation
Applications & Use Cases
Precast box beams are used in highway and roadway bridges, pedestrian crossings, parking structures, and marine platforms, providing efficient, high-strength solutions for short- to medium-span structures that demand durability and rapid installation.
Our Locations
Heldenfels Enterprises, Inc.
5700 IH-35 South. San Marcos, TX 78666
Tel: (512) 396-2376
Fax: (512) 396-2381
Heldenfels Enterprises, Inc.
2222 Laredo St. Corpus Christi, TX 78405
Juan Aguirre: (361) 533-1031
Heldenfels Headquarters
Heldenfels Corpus Christi
Frequently Asked Questions
What are precast box beams used for?
What are the advantages of using box beams over other beam types?
Can box beams be customized for non-standard applications?
Yes. Our engineering team regularly designs custom box beam geometries, reinforcement layouts, and connection details to meet unique project needs such as pedestrian or marine structures.
Are Heldenfels box beams approved for TxDOT or other state specifications?
How do box beams perform in harsh environments like coastal or marine settings?
Larry Miller, PE
VP of Pre Construction & Business Development